Our sand making machine includes Vsi sand machine, PCL sand making machine and VSI5X sand making machine (also named VSI5X vertical shaft impact crusher).
VSI5X sand making machine is our newly researched equipment, with international advanced level. Technology and modern processing equipment make it a leading role in this industry.
The features of our VSI5X sand making machine is belows:
1. Rotor with deep chamber increases 30% capacity after perfect design.
2. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%.
3. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate.
4. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area.
5. Rhombus shape impact plate is used to prevent side plate from being damaged.
6. Bearing is famous international brand imported from Japan, Sweden, America, etc.
7. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly.
8. Spread dish with double purposes can make two feeding ways change easily.
9. Special seal structure under main shaft guarantee no oil leak without seal.
10. Japanese hydraulic opening cover device is originally imported. The cover is moved easily and inspection of inner part is easy.
11. Motor with high grade of protection is selected. The motor has features of high efficiency, low noise, etc. The motor complies with IEC, insulation grade F, protection grade IP54/55.
Notice: Any change of VSI5X Sand Making Machine technical data shall not be advised additionally.
Sand making machine, VSI5X vertical shaft impact crusher(also named VSI5X vertical shaft impact crusher), PCL sand making machine and VSI sand making machine.
model
VSI5X7615
VSI5X8522
VSI5X9532
VSI5X1145
Throughput capacity (t/h)
Center and Ring feeding
150~280
240~380
350~540
500~640
Center feeding
70~140
120~200
180~280
250~360
Max. Feed Size (mm)
Soft material
<35
<40
<45
<50
Hard material
<30
<35
<40
<45
Rotation speed (r/min)
1700~1900
1500~1700
1300~1510
1100~1310
Power of double motor (KW)
110~150
180~220
260~320
400~440
Overall dimension L x W x H (mm)
4100×2330×2300
4140×2500×2700
4560×2600×2900
5000×2790×3320
Weight (t)
8.6
11.8
17.5
27.5
Power source
380v,50Hz
Thin oil lubrication station
Power for double oil pump
2 x 0.31 KW
Safety
To make sure the supply of oil with double oil pump, working without oil, temperature when water cools, start the motor by heating it in winter.
Power for oil box heater
2 KW
Overall dimension L x W x H (mm)
820 x 520 x 1270
Note: Capacity depends on crushing limestone, material size, moisture and features also affect capacity.
Inquiry Basket (
